Sizing 12–20 kW Three-Phase Hybrid Storage for Farms and Workshops
SMALL COMMERCIAL ENERGY STORAGE
A farm cold room, irrigation pump and workshop often share a small three-phase connection. A hybrid inverter in the 12–20 kW class paired with a low-voltage battery is one way to support selected loads. To see whether it fits, check what the inverter and batteries can deliver together in the operating mode the site needs.
Calculate battery-only power separately
At an idealized 48 V, delivering 12 kW takes about 250 A on the DC side and 20 kW takes about 417 A before losses. As battery voltage falls, current demand rises. A manufacturer’s 20 kW AC rating and its battery-input current limit describe different things. Confirm BMS and inverter limits together at the expected minimum loaded battery voltage and temperature. Use the approved battery count and communication configuration.
Review the actual load by phase
An inverter may support unbalanced output while still imposing a hard cap on each phase. List sustained loads and simultaneous motor starts, then compare the inverter’s overload curve with measured starting requirements. For a farm, the critical loads might be cooling and controls, with irrigation scheduled separately. In a workshop, splitting motor starts can change the size of the backup system.
Compare the full installed scope
Price the battery bank, approved DC conductors and protection, transfer equipment, approved mounting, and commissioning together. Where a generator or an existing PV inverter is involved, establish which source combinations and switching modes the manufacturer supports. Use an installer familiar with the applicable grid and electrical rules. A higher-voltage or integrated commercial system may be the better fit if the current limit or backup requirements make the low-voltage design impractical.
How YINTU helps with equipment matching
As a solution provider, YINTU compares battery and inverter interfaces against the site’s power, runtime and expansion plan. The 5.12 kWh, 51.2 V rack battery is an example of a battery module that requires a compatible external inverter. For sites that need a packaged system, compare YINTU’s commercial and industrial storage range.
Reporting and reference material
Deye, SUN-14–20K-SG05LP3-EU-SM2 published inverter specifications (industry example); YINTU published rack battery specifications.
Cover image: AI-generated editorial illustration.