50 kW Solution150 Hybrid ESS for Supervised Remote-Site Power

Equipment model: YT-DS5T0150-PVW50A. This page describes the stated configuration or application review. Final supplied equipment and project interfaces follow the confirmed technical agreement.

A remote site needs an operating plan

Remote workshops, agricultural service compounds and accommodation facilities may have limited staff available to respond to a power problem. This application uses the Solution150 cabinet as one part of a supervised power system. Set load priorities, reserve SOC and the route from a remote alarm to a local operator before deployment. Remote connectivity does not remove the need for a practical service and emergency-response arrangement.

Coordinate solar, battery and diesel reserve

The cabinet has a 50 kW AC output and 150.5 kWh rated battery energy. Direct PV input is specified up to 50 kW; the diesel input is separately rated at 50 kW. Establish which loads may be deferred when SOC is low, when the generator may start, and how battery recharge is limited while site loads remain supplied. Optional wind integration requires a separately agreed turbine interface and unloading/protection arrangement. Input ratings are not additive output ratings.

Define the alarm and shutdown matrix

The source describes BMS, EMS, smart temperature control and fire protection, with RS485, Ethernet and 4G communication. Ask the manufacturer to map available alarms and remote commands to the project monitoring system. The proposed matrix should distinguish an advisory notification, controlled power reduction, electrical isolation and a local emergency response. Confirm signal availability, fail-safe behaviour on communication loss and reset authority; this listing does not claim those site-level functions are preconfigured.

Make service access part of the solution

Plan the 3000 kg cabinet foundation, delivery route, access clearances, earthing and operator inspection points. Agree periodic checks for filters, thermal equipment, alarms, protective devices and generator readiness using the manufacturer maintenance instructions. YINTU works with YOTAI and other manufacturing partners as an energy storage solution provider. The quotation identifies the cabinet, optional interfaces, monitoring integration, spares and commissioning/service responsibilities.

Source-Supported Selection Data

Frequently Asked Questions

Is 4G monitoring enough for an unattended site?

Connectivity is only one part of the plan. Confirm actual signals, connection availability, the loss-of-communication state and who can respond locally.

Is the wind interface supplied as standard?

No. It is optional in the source. Include the selected turbine, interface, protection and unloading controls explicitly in the quotation.

Explore our Commercial & Industrial Energy Storage solutions and share the project load, connection conditions and required duty with YINTU for a configuration review.

Selection data are based on the supplied datasheet and verified product records. Application calculations are illustrative and do not establish guaranteed performance, savings or warranty terms. The cover is a generated product-view illustration based on the existing model image; final equipment follows the approved configuration.