5.12 kWh 19-Inch Rack Battery for Compact Home Installations

Selected configuration

Check the rack’s real usable depth

The 19-inch front format gives the rack width reference. Verify the 482 mm module depth against the usable support and enclosure space. Allow for terminals, cable bend radius, ventilation and front service access using the equipment drawing. The 42 kg module needs the approved rail or shelf and a rack suitable for the installed load. Confirm the manufacturer’s support and handling instructions before choosing the rack hardware.

Check the connected inverter

The module is 51.2 V nominal, with a stated 44.8–57.6 V operating range. Verify the inverter battery window, firmware, BMS protocol and cable pinout. Plan normal operation around the recommended 50 A charge and discharge current and confirm the 100 A maximum continuous figure against the operating conditions. Nominal DC power at 50 A is about 2.56 kW before conversion losses.

Plan for modular growth

Assess one module against the home’s measured essential loads and intended reserve. A later parallel expansion needs the approved module combination, BMS addressing, current sharing and suitable protection. Confirm placement for all expected modules, with service access and natural cooling considered in the rack design. The source lists IP20 and a charging range of 0 to +55°C for the module.

Confirm the installation package

YINTU coordinates the battery module and matching interfaces with manufacturing partners. The external inverter, rack, DC protection, cables and AC distribution belong to the project configuration. Share the rack drawings and inverter reference to check fit and communications before ordering.

Cover illustrates a single module. Confirm the rail, cables and compatible inverter configuration before installation.

Residential Energy Storage Systems