32 kWh Stackable Home ESS for Longer Split-Phase Reserve

Brand Name:YINTU
Model Number:YT-Stackable ESS-12kW-32kWh
Product Details
Highlight:

32 kWh stackable home ESS

,

split-phase residential energy storage

,

longer reserve home battery system

Battery Arrangement: 2 × 16 KWh Modules
Configured Rated Energy: 32 KWh
Inverter Rating: 12 KW Split Phase; 7.2 KW Single Phase
AC Output: 120 / 240 V Split Phase
Battery Voltage: 51.2 V DC Nominal
PV Charging: 9 KW + 9 KW Maximum, 120–450 V DC Operating
Module Size / Net Mass: 760 × 240 × 400 Mm / 125 ±5 Kg Each
Installation: IP20, Indoor
Product Description

32 kWh Stackable Home ESS for Longer Split-Phase Reserve

Choose two 16 kWh battery modules with a 12 kW split-phase inverter. Plan indoor handling and evaluate overnight reserve for selected 120 / 240 V circuits.

YT-Stackable ESS-12kW-32kWh

Selected configuration

Battery arrangement 2 × 16 kWh modules
Configured rated energy 32 kWh
Inverter rating 12 kW split phase; 7.2 kW single phase
AC output 120 / 240 V split phase
Battery voltage 51.2 V DC nominal
PV charging 9 kW + 9 kW maximum, 120–450 V DC operating
Module size / net mass 760 × 240 × 400 mm / 125 ±5 kg each
Installation IP20, indoor

Use energy and power as separate checks

This stack uses two 16 kWh modules with the split-phase inverter. Use an overnight circuit schedule to add up energy for refrigeration, lighting and other selected loads. Keep a reserve for SOC limits and conversion loss. Check peak and starting power separately for each leg. The 12 kW figure is the split-phase inverter rating. Battery-only output depends on battery current limits and operating voltage.

Plan the indoor route for two modules

Each module weighs approximately 125 kg, with the source tolerance of ±5 kg. Check the floor, access route, lifting equipment and working space for two battery modules, inverter and base. Verify the stacked layout and mounting method with the approved drawings. The IP20 assembly requires a suitable indoor location.

Connect the solar and load package

YINTU, an energy storage solution provider, coordinates the configured stack and its integrated inverter. The PV field, circuit panel and external protection are selected for the installation. Review the two PV charging channels, maximum open-circuit voltage of 500 V DC, and available solar recharge when assessing overnight reserve.

Equipment illustration based on the model reference. The approved drawing and technical agreement define the ordered configuration.

Residential Energy Storage Systems

You May Also Like
Quality Floor Standing Residential Energy Storage Systems 16 KWh Long Lasting Home Energy Solutions factory

Floor Standing Residential Energy Storage Systems 16 KWh Long Lasting Home Energy Solutions

A 16 kWh floor-standing LiFePO4 battery with 51.2 V, 314 Ah and four casters. Standard current: 100 A; maximum continuous current: 200 A. Supports up to 15 parallel units, Bluetooth and BMS communication with a compatible external inverter.
Quality Indoor Floor Standing Residential Energy Storage Systems All In One Solar Storage For Homes factory

Indoor Floor Standing Residential Energy Storage Systems All In One Solar Storage For Homes

Floor-standing home solar storage with an integrated off-grid PV inverter and LiFePO4 battery. Four configurations offer 5.12–14.3 kWh and 5–11 kW, with direct PV input, AC charging and 230 V output. IP20 for indoor use.
Quality 12 KW / 32 KWh Stackable Home Solar Energy Storage Systems All In One ESS IP20 factory

12 KW / 32 KWh Stackable Home Solar Energy Storage Systems All In One ESS IP20

A 32 kWh stackable home ESS using 2 × 16 kWh battery modules and a 12 kW split-phase inverter. The appliance-style design combines solar input and battery storage for compatible 120 / 240 V homes.
Quality 5 KW 10.24 KWh Stackable Residential Battery Storage Systems All In One Solar ESS factory

5 KW 10.24 KWh Stackable Residential Battery Storage Systems All In One Solar ESS

A 10.24 kWh stackable home battery with an integrated 5 kW inverter, 120 V AC output and up to 6 kW PV input. The appliance-style enclosure brings solar charging and battery storage into a tidy indoor system.
Contact Us
You Can Contact Us At Anytime!