5 kW / 15 kWh Stackable Solar ESS for Indoor 120 V Loads

Brand Name:YINTU
Model Number:YT-Stackable ESS-5kW-15kWh
Product Details
Highlight:

5 kW stackable solar ESS

,

15 kWh indoor solar ESS

,

120 V residential energy storage

Source Configuration: FM15K1A-5KF1-JP1
Source-Rated Battery Energy: 15 KWh
Rated Inverter Output: 5 KW, 120 V AC
Battery: 51.2 V LFP, Three Modules
PV Input: 6 KW Max. / 300 V DC Max.
MPPT Range / Current: 70–280 V DC / 30 A Max.
Enclosure / Dimensions: IP20 / 550 × 170 × 1705 Mm
Approximate Mass: 138 Kg
Product Description

5 kW / 15 kWh Stackable Solar ESS for Indoor 120 V Loads

Plan a three-module indoor stack for 120 V essential circuits. Check installation access, solar recharge and the load budget for the 15 kWh version.

YT-Stackable ESS-5kW-15kWh

Selected configuration

Source configuration FM15K1A-5KF1-JP1
Source-rated battery energy 15 kWh
Rated inverter output 5 kW, 120 V AC
Battery 51.2 V LFP, three modules
PV input 6 kW max. / 300 V DC max.
MPPT range / current 70–280 V DC / 30 A max.
Enclosure / dimensions IP20 / 550 × 170 × 1705 mm
Approximate mass 138 kg

Budget energy for selected 120 V circuits

The 15 kWh version increases storage capacity while retaining the 5 kW 120 V inverter. Estimate the energy of the intended circuits over the target outage or overnight period and check starting loads separately. Actual usable AC energy depends on allowable SOC, conversion loss and operating conditions. The battery energy figure follows the source designation.

Check the taller stack before delivery

The source gives 550 × 170 × 1705 mm and approximately 138 kg for this version. Check floor loading, handling access, service space and mounting in an indoor IP20 location. Review the approved installation drawings before setting the cable route and deciding which existing circuits to retain.

Define PV and distribution scope

The integrated inverter supports PV charging up to 6 kW subject to the voltage and current limits. YINTU coordinates selection and supply of the stack as an energy storage solution provider. PV modules, wiring, breakers and load distribution are specified separately for the installation.

Equipment illustration based on the model reference. The approved drawing and technical agreement define the ordered configuration.

Residential Energy Storage Systems

You May Also Like
Quality Floor Standing Residential Energy Storage Systems 16 KWh Long Lasting Home Energy Solutions factory

Floor Standing Residential Energy Storage Systems 16 KWh Long Lasting Home Energy Solutions

A 16 kWh floor-standing LiFePO4 battery with 51.2 V, 314 Ah and four casters. Standard current: 100 A; maximum continuous current: 200 A. Supports up to 15 parallel units, Bluetooth and BMS communication with a compatible external inverter.
Quality Indoor Floor Standing Residential Energy Storage Systems All In One Solar Storage For Homes factory

Indoor Floor Standing Residential Energy Storage Systems All In One Solar Storage For Homes

Floor-standing home solar storage with an integrated off-grid PV inverter and LiFePO4 battery. Four configurations offer 5.12–14.3 kWh and 5–11 kW, with direct PV input, AC charging and 230 V output. IP20 for indoor use.
Quality 12 KW / 32 KWh Stackable Home Solar Energy Storage Systems All In One ESS IP20 factory

12 KW / 32 KWh Stackable Home Solar Energy Storage Systems All In One ESS IP20

A 32 kWh stackable home ESS using 2 × 16 kWh battery modules and a 12 kW split-phase inverter. The appliance-style design combines solar input and battery storage for compatible 120 / 240 V homes.
Quality 5 KW 10.24 KWh Stackable Residential Battery Storage Systems All In One Solar ESS factory

5 KW 10.24 KWh Stackable Residential Battery Storage Systems All In One Solar ESS

A 10.24 kWh stackable home battery with an integrated 5 kW inverter, 120 V AC output and up to 6 kW PV input. The appliance-style enclosure brings solar charging and battery storage into a tidy indoor system.
Contact Us
You Can Contact Us At Anytime!