125 kW Smart261L Cabinets for Staged Industrial Expansion

Selected configuration

Reserve capacity at the first stage

The Smart261L gives an EPC team a 125 kW building block with 261.248 kWh of nameplate battery energy. Establish the first-stage power and usable-energy targets from the site load profile, then reserve feeder positions, isolation points, floor space and cable routes for the contemplated expansion. The manufacturer describes a 125 kW to 1.25 MW platform. Final cabinet count and site export capacity depend on the electrical design.

Allocate dispatch to each cabinet

Use the available Ethernet or RS485 interfaces and agree the Modbus register map before detailed design. The site controller should allocate charge and discharge commands according to cabinet availability, battery limits and alarms. Test communication loss, cabinet isolation and reintegration during commissioning. Review the metering location and transformer loading against the aggregated operating plan.

Define the supplied equipment

Each liquid-cooled Smart261L cabinet integrates the battery, PCS, BMS and cabinet EMS. YINTU, an energy storage solution provider, coordinates the manufacturing partner and cabinet selection. Site supervisory controls, AC combiner, protection, transformer and external PV equipment are defined in the project scope.

Equipment illustration based on the model reference. The approved drawing and technical agreement define the ordered configuration.

Commercial & Industrial Energy Storage